how to draw a 3d circle by hand

Download Article

Download Article

Shapes are some of the start things you probably learned to depict. With a footling practice, you can make those shapes appear 3-dimensional. In most cases, you'll but need to draw a line that curves on your shape to create perspective. Once you have the outline of a 3D shape, imagine where the light source is hitting information technology and shade the opposite side heavily.

1. 1

   Make a circumvolve using a pen or pencil. Draw the circle and then it's every bit wide as you lot'd like the sphere to be. Press lightly so you can easily become back and shade in the sphere. For a fiddling help cartoon a circle, trace something round or use a compass.^[1]

2. 

   ii

   Draw a curved line beyond a circumvolve to create a 3-dimensional sphere. You can brand the line curve up or down in the middle of the circle to suggest the viewer is looking at the sphere from beneath or above. Curve the line as far up or down every bit you want, keeping in mind that a shallow curve gives you a side-view perspective.^[ii]

   • If you'd like to bear witness fifty-fifty more 3-dimensional item, draw a dotted or dashed line that curves across the circumvolve in the reverse management of your line. The dotted line implies that y'all're looking backside the sphere.

   Advertisement

3. 3

   Utilise heavy pressure to shade a sliver of the sphere's side and lesser. Make up one's mind where light hits your sphere and begin shading along the opposite side of the sphere where the shadow would fall. And then, employ a little less force per unit area equally you shade in the curved eye of the sphere. Utilize a light touch to shade merely a little where the light would striking the sphere.^[3]

   • For example, if light hits the top right of the sphere, press firmly along the bottom left portion of the sphere to make a shaded crescent.

   Advertisement

1. 

   1

   Describe 2 overlapping squares that are the aforementioned size. Make a simple foursquare that'south any size you like. Then, place your pencil in the center of the foursquare and sketch another square from this betoken so you lot have two squares that overlap slightly.^[iv]

   • Information technology's important to make the squares the same size or they won't class a cube when yous connect them.

2. 

   two

   Brand directly lines that connect the corners of the squares. Draw a straight line from i corner of a foursquare to the matching corner of the other square. Repeat this for each corner to create a cube.^[5]

   • Make the straight lines connecting each corner parallel to make the cube realistic.

   Tip: If you don't desire all the lines to be visible, erase the three connecting lines that are in the center of the square that's closest to you lot.

3. 3

   Shade ane side of the cube dark and employ light pressure to shade the other sides. Since 1 side of the cube volition be blocked from a lite source, shade information technology in heavily so it'due south noticeably night. Then, use medium or light pressure to shade the top of the box and the other visible side of the cube.^[vi]

   • To make the cube even more realistic, depict a foursquare-shaped shadow coming from the dark side of the cube.

   Advertisement

1. ane

   Sketch a 5 shape using a pen or pencil. If you can draw a triangle, you lot tin easily make a cone. Describe a V shape or sketch it upside downwards equally though you're starting to draw a triangle without its base.^[7]

   • Make the V shape as large as you'd like the cone to be.

2. 

   2

   Draw an oval at the base of the V shape. Lightly sketch an oval shape that connects the 2 widest points of the V shape. This seals off the shape to create a iii-dimensional cone.^[viii]

   Tip: If you're making an upside-down V shape, you could shade in a shadow from the bottom of 1 side.

3. 3

   Darken 1 side of the cone and gradually shade to the reverse side. Rub the tip of your pencil back and along forth 1 side of the cone until it's heavily shaded. Utilise a little less pressure as you shade towards the centre of the cone and use a light bear upon the reverse side.^[9]

   • Add a piffling more shading along the bottom of the cone near the darker side of the cone.

   Advertising

1. i

   Make an equilateral triangle. Take a pencil and describe a triangle that has equal sides. An equilateral triangle too has 3 equal angles since the sides are the same length. If it helps, trace an equilateral triangle or use a ruler so you get exact measurements.^[10]

2. 

   two

   Sketch another triangle coming from 1 side of your equilateral triangle. Place your pencil at the top of the equilateral triangle and make a straight line that comes down towards the side of the first triangle, but don't let information technology reach as far as the bottom of the starting time pyramid. Then, draw a straight line connecting the bottom of this line with the corner of the kickoff pyramid.^[eleven]

   • Make the superlative angle of the side pyramid between 20 and xl degrees and then your pyramid doesn't look unbalanced.

   Tip: If you'd similar to evidence the view inside the pyramid, draw a foursquare using a dashed line forth the base of the triangle. Make another dashed line from the back corner of the square to the elevation of the pyramid.

3. 3

   Shade in 1 side of the pyramid and leave the other side lighter. Decide where the light is hit your pyramid and shade the opposite side until it's night. For case, if the light is hitting the side of the pyramid, shade in the front end so it looks similar it'south in shadow.^[12]

   • If you'd like to include a shadow, shade in a triangular shape coming from the bottom of the pyramid.

   Advert

1. 1

   Draw a triangle to make the front of the prism. Y'all can brand the triangle any size you like. Consider making it big until you become comfortable with drawing prisms. And then, you can try making tiny triangular prisms.^[13]

   • You can make any type of triangle you like. Make an equilateral, isosceles, or a right triangle, for instance.

2. 

   2

   Create another triangle that'southward the same size as the kickoff triangle. Place this identical triangle where y'all want the prism to end. This triangle makes the dorsum face of the prism.^[14]

   • Ensure that the triangles aren't touching or it will be difficult to draw the remaining lines for the prism.

3. 

   3

   Draw straight lines to connect each of the front triangle points with the dorsum points. Place your pencil on the elevation of the front triangle and draw a straight line to the top of the back triangle. Repeat this for the other two points of each triangle to create a prism.^[15]

   Tip: If you'd like the triangular prism to appear opaque, erase the center lines of the prism.

4. 4

   Shade in 1 side of the triangular prism. Think about how the calorie-free is hitting the prism and shade in the other side of the prism until information technology's night. For example, if low-cal is striking the side of the prism, make the front end confront dark.^[16]

   • If you'd like the lite to hit the front end of the prism, heavily shade in the side.

   Advertisement

Add together New Question

• Question

  How can I depict a rectangular prism?

  

  You can make a rectangular prism by turning the squares in the cube instructions into rectangles.

• Question

  How do I draw a pyramid?

  

  Wait at the finished triangular prism. Think, a triangular prism is a pyramid, don't allow the names fool you!

• Question

  How practise I depict a 3D pentagon?

  

  If you want it to be like a rectangular prism, but a pentagon, I recommend drawing the 2 pentagons and then connecting the corners. The 2nd pentagon will exist slightly above and to the left of the first, merely they volition still overlap.

Ask a Question

200 characters left

Include your e-mail accost to become a bulletin when this question is answered.

Submit

Advertisement

• You lot can make a rectangular prism by connecting 2 squares with directly parallel lines.

• Use a ruler to make perfectly direct lines for your 3-dimensional shapes.

Thanks for submitting a tip for review!

Advertisement

Things You lot'll Demand

• Abrupt pencil
• Paper or drawing pad
• Colored pencils, optional

About This Commodity

Article Summary Ten

To draw a 3D shape, start past drawing a square in the center of a piece of paper. So, describe some other foursquare in a higher place it and to the right. The bottom left of the second square should intersect the top right of the first square, creating a smaller square between the two. Adjacent, connect the corners of the offset foursquare to the corners of the second square with direct lines. Finally, erase the inside lines and then that you're left with a solid cube. For tips on how to depict other 3D shapes, like cylinders or pyramids, keep reading.

Did this summary help you?

Thanks to all authors for creating a folio that has been read 167,421 times.

Did this commodity help you?

reidstroathemed.blogspot.com

Source: https://www.wikihow.com/Draw-3D-Shapes

Share this post